4 – English
EXPLANATION OF SYMBOLS
These symbols are on the machine and in the operator’s manual.
Study them carefully so that you know what they mean.
Read the operator’s manual
Reverse Neutral Fast Slow Engine off Battery Choke Fuel
Oil level Cutting height Backwards Forwards Ignition
Hydrostatic free wheel Use hearing protection Parking brake Brake Warning
Never use the machine if persons, especially
children, or animals, are in the vicinity.
Starting instructions
Read the instructions
Check the engine’s oil level
Check the hydrostat’s oil level
Lift up the cutting unit
Put the hydrostat pedals in the
neutral position
Brake
If the engine is cold use the choke
Start the engine
Release the parking brake before
driving
Drive very slowly without
the cutting unit.
Keep hands and feet away
from under the hood when
the engine is running.
N
R
Speed limiter pedal forwards
Neutral
Speed limiter pedal reverse
Switch off the engine and take off
the ignition cable before repairs
or maintenance
Never carry passengers on the
machine or equipment.
Noise emission to surroundings in accordance
with the directive of the European Community. The
machine’s emission is indicated in the chapter
TECHNICAL DATA and on the decal.
CE conformity
marking
Warning!
Risk that the machine
can tip over
Never drive across a
slope
Warning!
Rotating blades.
Comments to this Manuals