Husqvarna 15V2 User Manual download pdf (Page 43)

English – 41

LUBRICATION

Lubricating the belt adjuster

The belt adjuster should be lubricated regularly

using good quality molybdenum disulphide

grease*.

1 nipple from the right-hand side under the engine’s

lower belt pulley, until grease is forced out.

With daily use lubrication should be conducted

twice a week.

General lubrication

All joints and bearings are lubricated on

manufacture with molybdenum sulphide grease.

Re-grease with same type of grease*. Lubricate the

steering and control wires with engine oil.

The machine should be lubricated regularly, and

twice a week when used daily.

* Grease from well-known brand names (petrol

companies, etc.) usually maintains a good quality.

The most important property is that the grease

provides good protection against corrosion.

Checking the transmission’s oil level

1. Remove the transmission cover. Loosen both

screws (one on each side) and lift off the

transmission cover.

2. Check that there is oil in the transmission’s oil

tank. Fill if necessary with engine oil SAE 10W/

30 (class SF–CC).

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 51 52

No comments

Husqvarna 15V2 User Manual Page 43