Husqvarna 15V2 User Manual download pdf (Page 20)

18 – English

Mowing pattern

DRIVING

4. Push in the lock button on the lift lever and lower

down the cutting unit.

WARNING!

Clear the lawn from stones and

other object which can be thrown

out by the blades.

Cutting tips

• Localise and mark stones and other fixed

objects to avoid collision.

• Start with a high cutting height and reduce down

until the required cutting result are obtained.

• The cutting results are best with a high engine

speed (fast rotating blades) and low driving

speed (slow moving machine). If the grass is not

too high and thick, the driving speed can be

increased without noticeably depreciating the

mowing result.

• The best lawns are achieved if the grass is cut

often. Mowing becomes more uniform and the

grass cuttings become more evenly distributed

over the surface. The total time consumption is

not greater since it is possible to select a higher

driving speed without inferior mowing results.

• Avoid mowing a wet lawn. The mowing results

are inferior since the wheels sink down into the

soft lawn.

• Wash down the underside of the cutting unit

with water after use. Do not use a high pressure

jet. Put the cutting unit in the service position

while doing this.

• If you use the mulching function, it is important

to mow the grass regularly.

IMPORTANT INFORMATION

The service-life of the drive belts

increases considerably if the engine is

run at low speed when engaging the

blades. For this reason do not increase

the throttle until the cutting unit has been

lowered to the cutting position.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 51 52

No comments

Husqvarna 15V2 User Manual Page 20