Husqvarna 15V2 User Manual download pdf (Page 48)

46 – English

SERVICE JOURNAL

Work done

Pre-delivery service

1. Top up battery with acid and recharge for four hours.

2. Fit steering wheel, seat and any optional equipment.

3. Adjust cutting unit:

Adjust the lifting springs (the “weight” of the cutting unit should

be 12-15 kg/26,5-33 lbs). Applies to BioClip and Combi deck.

Adjust cutting unit so that rear edge is about 2–4 mm/1/8"

higher than front edge.

Adjust cutting unit height setting so that cutting height limit is

5 mm/3/16" above the frame of the unit at the lowest cutting

height.

4. Check that engine has correct amount of oil.

5. Check that the right amount of oil is in the transmission.

6. Check and adjust tyre pressure (60 kPa/0.6 bar/8.5 PSI).

7. Connect battery.

8. Fill with fuel and start engine.

9. Check that machine does not move in neutral.

10. Check:

Forward drive.

Reverse drive.

Operation of blades.

Seat safety switch.

Lift lever safety switch.

Safety switch for the hydrostat pedals.

11. Check engine revs 2 900±100rpm.

12. Tell customer about:

Need and benefits of following the service schedule.

The need and advantages of leaving the machine for regular

service.

The effects of maintenance on the machine’s second hand

value.

Range of applications for BioClip.

13. Complete proof of sale, etc.

Pre-delivery service carried out.

No outstanding problems.

Certified:

After first 8 hours

1. Change engine oil.

Date, mileage, stamp, sign

1 2 ... 43 44 45 46 47 48 49 50 51 52

No comments

Husqvarna 15V2 User Manual Page 48