Husqvarna EZ24T/ 966659601 User Manual download pdf (Page 45)

LUBRICATION

Front Wheel Mount

Lubricate with a grease gun, one zerk for each wheel

mount, until the grease is forced out.

Use only good quality bearing grease.

Grease from well-known brand names (petrochemical

companies) usually maintains a good quality.

Front Wheel Bearings

Lubricate with a grease gun, one zerk for each set of

wheel bearings, until the grease is forced out.

Use only good quality bearing grease.

8058-068

Lubricating the front wheels

8058-142

Deck spindle

IMPORTANT INFORMATION

Use minimal lubrication and remove excess

lubricant so that is does not come into contact

with belts or belt pulley drive surfaces.

Deck Spindle

Lower the cutting deck completely.

If a grease gun without a rubber hose is used, the foot

plate must be removed.

Lubricate with a grease gun, one zerk, 2-3 strokes.

Use only good quality bearing grease.

Deck Outer Spindle

Through the access hole in the belt shield, lubricate

outer deck spindles zerk, using a grease gun and

2-3 strokes per side. Use only good quality bearing

grease.

8061-035

Deck outer spindle

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 59 60

No comments

Husqvarna EZ24T/ 966659601 User Manual Page 45