Husqvarna EZ24T/ 966659601 User Manual download pdf (Page 30)

OPERATION

5. Move throttle control to full throttle.

6. Engage the mower deck by pulling out the blade

switch.

The machine’s speed and direction are

continuously variable using the two steering

controls. When both controls are in the neutral

position, the machine stands still.

By moving both controls an equal amount forward

or backward, the machine moves in a straight line

forward or backward respectively.

In order, for example, to turn right while moving

forward, move the right control towards the neutral

position. The rotation of the right wheel is reduced

and the machine turns to the right.

Turning on the spot (zero turn) can be achieved

by moving one control backward (behind the

neutral position) and carefully moving the other

steering control forward from its neutral position.

WARNING!

Do not drive up or down hills with

slopes greater than 10 degrees. Do

not drive across slopes.

8052-001

Set blade engagement and throttle control

8061-026

Place controls in neutral position

8058-020

Parking brake released

Operating On Hills

Read Driving on Slopes in the Safety section.

• The slowest speed possible should be used

before starting up or down hills.

• Avoid stopping or changing speed on hills.

• If stopping is absolutely necessary, pull drive

levers into the neutral position and push to the

outside of the unit and engage the parking brake.

• To restart movement, release the parking brake.

• Pull the control levers back to the center of the

mower and press forward to regain forward

motion.

• Make all turns slowly.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 59 60

No comments

Husqvarna EZ24T/ 966659601 User Manual Page 30