Husqvarna 1030 BioClip User Manual

101 89 37-26Rider 1030 BioClipRider 1200Operator´s manualPlease read these instructions carefully and make sureyou understand them before using the ma

8 – English• Check the fuel level each time before using themachine, and leave space for the fuel to expandsince the heat from the engine and hot sun

English – 9PresentationThese instructions describe two machine models,Rider 1030 Bioclip and Rider 1200.Rider 1030 Bioclip and Rider 1200 are fitted w

10 – EnglishThrottle controlThe throttle control regulates the engine speed, andthereby also the rotation speed of the blades.To increase or reduce th

English – 11Cutting unitRider 1030 has a Bioclip unit which cuts the grassfinely by cutting it several times before it is returnedto the lawn as ferti

12 – EnglishPRESENTATIONLever for adjustment of the cuttingheightThe cutting height can be adjusted to 7 differentpositions with the cutting height le

English – 13Before starting• Read the safety instructions and information onthe location and function of the controls beforestarting (see pages 5–12).

14 – EnglishDRIVING5. When the engine starts release the ignition keyimmediately back to neutral position.IMPORTANT INFORMATIONDo not run the starter

English – 153. Select the required cutting height (1–7) with thecutting height lever.4. Push in the lock button on the lift lever and lowerdown the cu

16 – EnglishDRIVING!WARNING!Never drive the machine on groundat an angle of more than 15°. Mowslopes upwards and downwards,never across. Avoid sudden

English – 1725 50100300MAINTENANCE!Check the engine’s oil level 19 ●Check the engine’s cooling air inlet 19 ●Check the fuel pump’s air filter 19 ●Chec

Svenska – 31Sve-5 225/232/235 Bruk 97-11-25, 08.4631

18 – EnglishDismantling of the machine hoodsEngine hoodRelease the two rubber straps on the rear edge ofthe engine hood and lift off the hood.Front ho

English – 19Check the engine’s oil levelCheck the oil level in the engine when the machineis horizontal.Dismantle the engine hood as per the descripti

20 – EnglishCheck the transmission’s air intakeCheck that the transmission’s air intake in notblocked.Check the transmission’s oil level1. Check the t

English – 21Checking and adjustment of thesteering wiresThe steering is controlled by means of wires.These can in time become slack, which implies tha

22 – EnglishChecking and adjusting the brakeCheck that the brake is correctly adjusted byplacing the machine on a slight downward slopeand applying th

English – 23Replacing the air filterIf the engine seems to lack power or does not runsmoothly this may be because the air filter isclogged.It is there

24 – EnglishChecking and adjustment of the cuttingunit’s ground pressureTo achieve the best cutting results the cutting unitshould follow the underlyi

English – 25Checking and adjusting the cuttingunit’s parallelismTo achieve good mowing results it is important thatthe unit is parallel with the groun

26 – EnglishCutting unit on Rider 1200 (rear ejection)MAINTENANCEDismantling the cutting unitThe cutting unit can be released from the machinefor clea

English – 27Changing the oilThe oil should be changed for the first time after 8hours of running time. Thereafter it should bechanged every 50 hours o

English – 1Safety instructions ... 2Safety rules for USA... 2Explanatio

28 – EnglishReplacement of the oil filter1. Dismantle the engine hood as described onpage 18.2. Drain off the engine oil according to the workdescript

English – 29Checking and adjustment of the throttlewireCheck that the engine responds to the throttlecontrol and that the correct engine speed isachie

30 – EnglishChecking the tyre pressureThe tyre pressure should be 60 kPa (0.6 kp/cm2)all round.To improve driving the pressure on the rear tyrescan be

English – 31Problem ProcedureEngine will not start. • Fuel tank empty.• Plugs defective.• Plug connections defective.• Dirt in carburettor or fuel pip

32 – EnglishWinter storageAt the end of the season the machine shouldimmediately be put in order for storage, also if it isgoing to stand idle for mor

English – 33WIRING DIAGRAM1. Brake switch, hydrostat2. Microswitch, cutting unit3. Microswitch, seat4. Ignition lock5. Counter6. Start relay7.

34 – EnglishRider 1030 Bioclip, Rider 1200Dimensions Rider 1030 Bioclip Rider 1200Length 2300 mm 2300 mmWidth 1120 mm 1280 mmHeight 1085 mm 1085 mmUnl

English – 35

´*2}h¶6+¨

English – 37

2 – EnglishSAFETY INSTRUCTIONS1. Safety rules for USASafe operation practices for ride-on mowersIMPORTANT!This cutting machine is capable of amputatin

´*2}h¶6+¨

English – 3SAFETY INSTRUCTIONSIV. Service1. Use extra care in handling gasoline and otherfuels. They are flammable and vapours areexplosive.a) Use onl

4 – EnglishNever carry passengers on themachine or equipmentSpeed limiter pedal forwardsNeutralSpeed limiter pedal reverseStarting instructionsRead th

English – 5RIDER 970RIDER 970RIDER 970These instructions are for your safety. Read them carefully.SAFETY INSTRUCTIONSThis symbol implies that importan

6 – English• Watch out for traffic when working close to aroad, or crossing one.• Be careful when rounding a fixed object so thatthe blades do not hit

English – 7Do not do the following:• Avoid unnecessary turns on slopes, and ifturning is necessary turn slowly and gradually,downwards if possible.• D