Husqvarna O0803001 User Manual

Operator's Manual2008-01O0803001EZ / MZ Collection System (Fab Deck) Operator's Manual42"/ 48"/ 52"/ 61"

111. Remove the top right mount strap from the rear of the mower and save hardware.2. Remove the right rear skid plate bolt and the lower right moun

121. Remove the four carriage bolts indicated from the rear guard.2. Install the bagger mount tube from the mount kit.10INSTALLING BAGGER MOUNT3 Bin

1311INSTALLING CHUTE SUPPORT3 Bin System only1. Position upper chute support against bagger inlet, fl ush at outer edges. See Illustration.2. Using s

1412INSTALLING WEIGHT KITS 1¼ BoltNutCAUTIONDO NOT operate mower with grass catcher, unless the front weights are installed.2¾ BoltWeight BracketWeigh

15NOTE: For ease of assembly, you may wish assistance from another person for mounting the cover assembly to mower.1. Position cover assembly on grou

16TIPS FOR IMPROVED BAGGINGFollow the mower operation instructions in you mower operator’s manual.When operating your grass catcher on a lawn where gr

17GENERAL RECOMMENDATIONSAlways observe safety rules when performing any maintenance.• Before each use check for loose fasteners.• Clean unit thorou

18PARTS 1 ... 539 108081 ... 1 ... SCREW, SPEC 10- 14 x ½ 2 ... 539 108082 ... 1 ... BAG DUMP INDICATOR 3 ... 539 108083 ... 2 ... SCREW, 10- 24 x

19PARTSITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION 1 ... 532 124670 ... 1 ... RETAINER SPRING 2 ... 532 127533 .. 1 ..

20BAG ASSEMBLY 539 13160594107613811122351214131615PARTS

TABLE OF CONTENTSSAFETY RULES ...

21 1 ... 532 192709 ... 1 ... SCREEN, COVER 2 ... 532 195373 ... 1 ... COVER 3 ... 539 976952 ... 6 ... SCREW, #10-24 X 5/8 4 ... 539 108096 ... 2

224578910111314151617181920212223392625293038282412361012141523This side towards bearing33343536314432374443114047485051525351424546274948414540474455

23 1 ... 539 101977 ... 1 ... TRACTION SPRING 2 ... 539 976952 ... 1 ... SCREW 10-24 x .625 RD 3 ...539 104411 ... 1 ... KNOB W/STUD 4 ... 539

24123456666781112101917121622211512161418192013PARTS

25 1 ... 539 130305 ... 1 ... SHIELD, BELT, 42" 2 ... 539 130306 ... 1 ... SHIELD, BELT, 48" 3 ... 539 130307 ... 1 ... SHIELD, BELT, 52&

2612534 1 ...539 113232 ... 1 ... WEIGHT PLATE 2 ...539 113203 ... 2 ... WEIGHT BRACKET 3 ... 539 976979 ... 8 ... NUT 3/8-16 HEX NYLOC ZD 4 ... 5

539 130330 R3 01/22/08

4SAFETY RULESDANGER !THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OB-JECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTR

5DO NOT• Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.• Do not mow near drop-off, ditches, or emb

6CAUTIONWARNINGLook for this symbol to point out important safety precautions. It means CAUTION! BECOME ALERT! YOUR SAFETY IS INVOLVED.CAUTIONIn order

7UNPACKING INSTRUCTIONS• Remove all parts and packing materials from carton.TOOLS REQUIRED•7/16" Wrench or ratchet and socket• ½" Wrench or

81. Remove the discharge chute from the deck. (Deck confi guration will vary by size and model)2. Lower deck to the lowest cutting position.3. Remov

9ASSEMBLY1. Position blower over the discharge tabs on the deck and set blower onto the deck.2. Be sure the blower is sitting fl ush against the outs

101. Using the hacksaw, trim the belt cover along the dashed line.5TRIMMING BELT COVER (42" and 48" decks only)6INSTALLING BELT COVERS42/48