Husqvarna EZ24T/ 966659601 User Manual download pdf (Page 40)

MAINTENANCE

Blade replacement

1. Remove blade bolt by turning counterclockwise.

2. Install new or resharpened blade with stamped

GRASS SIDE facing towards ground/grass

(down) or THIS SIDE UP facing deck and cutter

housing.

3. Install and tighten blade bolt securely.

4. Torque blade bolt to 90 ft/lbs (122 Nm).

IMPORTANT INFORMATION

Special blade bolt is heat treated.

Replace with a Husqvarna bolt if required.

Do not use lower grade hardware than

speciﬁed.

8061-022

1. Blade

2. Blade bolt (special)

3. Cutter housing

Blade attachment

Cutting Blades

To attain the best mowing effect, it is important that

blades are well sharpened and not damaged.

Replace blades that have been bent or cracked when

hitting obstacles.

IMPORTANT INFORMATION

The sharpening of blades should be carried

out by an authorized service workshop.

WARNING!

Blades are sharp. Protect your hands

with gloves and/or wrap blades with

a heavy cloth when handling.

8011-604-1

Check the blades

Let the service workshop decide whether a blade

with large nicks can be repaired/ground or must be

replaced. Balance the blades after sharpening.

Check the blade mounts.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 59 60

No comments

Husqvarna EZ24T/ 966659601 User Manual Page 40