Husqvarna EZ24T/ 966659601 User Manual download pdf (Page 23)

CONTROLS

Hour Meter

The hour meter displays the total operating time.

It will ﬂash CHG OIL (Change Oil) at 50 hour intervals.

The ﬂash duration is one hour before and one hour

after the interval. The CHG OIL icon will come on

and shut off automatically. The hour meter cannot be

manually reset.

8052-001

Hour meter

Tracking Knob

If the mower is not tracking straight, check the tire air

pressures. Recommended air pressure is 15 psi (103

kPa / 1 bar) for all tires. Tracking must be checked on

a ﬂat and level concrete or blacktop surface.

Rotating the tracking knob allows ﬁne tuning

adjustments so the machine tracks straight with the

steering control levers in the full forward position.

Rotate the knob clockwise (as viewed from the

operation position) to increase the speed on the left

lever. Rotate counterclockwise to decrease speed.

8058-020

Tracking knob

Bypass Linkages

Transaxle bypass linkages must be engaged when

pushing or pulling the mower. The release levers are

located on each side of the rear of the unit below the

rear engine plate. See Moving Machine By Hand in

the Operation section.

8058-147

Release lever

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 59 60

No comments

Husqvarna EZ24T/ 966659601 User Manual Page 23