Husqvarna 500 H User Manual download pdf (Page 16)

7. Instructions for use of the equipment

Do not use the trimmer in rain or for cutting wet hedges!

Check the hedge trimmer flex and its connections before each and every use for

visible signs of damage (disconnect the power plug)! Do not use fau!ty hex.

G!oves

Protective gloves must be worn when using the hedge trimmer.

8. Maintenance

Aiways disconnect the plug from the power socket before commencing any work

on the machine.

Important: Always clean and oil the blades after prolonged use of the hedge trimmer.

This will greatly affect the life of the equipment. Damaged cutting units must be properly

repaired immediately.

Oiling of the blades should ideally be carried out using an environmentally friendly

lubricant (Fig. 6).

Sharpening of the blades

The blades generally do not need servicing and do not require resharpening if used

correctly. In order to prevent Injuries caused by the blades when not in use, the

sharpened cutting blade should be covered by the blunt cover (Fig. 4). The blades

cannot be sharpened by the user without opening the equipment and the safety

mechanism. Resharpening of the blades can therefore only be carried out at a specialist

workshop.

Changing the blades

Only correct installation of the blades will guaratee problem-free operation and function

of the above mentioned safety feature of the blades. Changing of the blades should

therefore also only be carried out at a specialist workshop.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 94 95

No comments

Husqvarna 500 H User Manual Page 16