Husqvarna 500 H User Manual download pdf (Page 14)

13. Be aware of your responsibility as user towards third parties in the working

area.

14. The trimmer must be properly checked and serviced. If the blades get

damaged they should only be exchanged in pairs. In the event of damage

from impact, specialist inspection is essential.

15. Only use extension leads which have been authorised for outside use. These

flexes must not be lighter than PVC covered flex conforming to 227 lEC 53.

They must be water spray protected. If the flex has to be changed, replace

it only with authorised flex H05 VV P with centrally shaped plug to fit sockets

complying with lEC 320. Equipment which will be used in different outside

locations must be onnected via residual current operated switches.

16. Ensure that the equipment is stored safely after use in such a way that the

blade cannot be touched.

17. When using the equipment hold it securely with both hands, stand firmly and

ensure that you have sufficient working space. There should be no people,

animals or objects within the working area. Select the cutting height so that

the blade does not make contact with the ground and you can operate the

equipment from a secure position.

18. Take care when transporting the equipment. For initial use of the hedge

trimmer we would recommend that in addition to reading the operating

instructions, you also seek a practical demonstration from an expert.

19. Always ensure that all protective devices and handles are properly fitted.

Never attempt to use an incomplete machine.

5. Pictogram illustration and explanation

Guide to identification plate

Remove plug immediately if the

power flex is damaged or cut

Do not use this electric power

tools in wet wether conditions!

Warning!

Read operation

instructions before use

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 94 95

No comments

Husqvarna 500 H User Manual Page 14