16530 EXLOPERATOR'S MANUAL
10TO THROW SNOW (See Fig. 15)The auger rotation is controlled by the auger control lever located on the right side handle.• Squeeze auger control lev
11OPERATIONUSING THE CLEAN-OUT TOOL (See Fig. 16)In certain snow conditions, the discharge chute may be-come clogged with ice and snow. Use the clean-
12NOTE: It is not recommended to operate the snow thrower over gravel or rocky surfaces. Objects such as gravel, rocks or other debris, can easily be
13CAUTION: Alcohol blended fuels (called gas o- hol or using ethanol or methanol) can attract moisture which leads to separation and for ma- tion of a
14MAINTENANCELUBRICATION CHARTGENERAL REC OM MEN DA TIONSThe warranty on this snow thrower does not cover items that have been sub ject ed to operator
15MAINTENANCESNOW THROWERAlways observe safety rules when performing main te nance.TIRES• Maintain proper air pressure in both tires (14–17 PSI).• K
16WARNING: To avoid serious injury, before per-forming any service or ad just ments:1. Be sure throttle is in STOP position.2. Remove safety ignition
17SERVICE AND ADJUSTMENTS7. RELIEVE TENSION ON TRACTION DRIVE BELT IDLER and remove traction drive belt from around pulleys.HINT: Insert a 3/8"
18AXLEKLIK PIN (INSTALL IN OUTER HOLE OF AXLE ONLY)OUTER HOLEWHEEL HUBWHEELFIG. 26SERVICE AND ADJUSTMENTS TO REMOVE WHEELS (See Fig. 26)• Remove the
19STORAGEImmediately prepare your snow thrower for storage at the end of the season or if the unit will not be used for 30 days or more.WARNING: Never
2IMPORTANTSafe Operation Practices for Walk-Behind Snow ThrowersThis snow thrower is capable of amputating hands and feet and throwing objects.Failure
20TROUBLESHOOTINGDoes not start 1. Fuel shut-off valve (if so 1. Turn fuel shut-off valve to OPEN position. equipped) in OFF position. 2.
21Consumer Wheeled Products – Limited Warranty Husqvarna warrants to the original retail purchaser that this Husqvarna® product is free from defects i
22c. Preventative maintenance as outlined in the operator’s manual. In addition, you must cease using the product immediately upon any failure or dama
23Consumer Wheeled Warranty Chart 2010Exhibit AConsumer (personal,household use only)Commercial (any commercial, professional, institutional, arigcul
532 43 58-96 05.19.10 TH Printed in U.S.A.Consumer Wheeled Warranty Chart 2010Exhibit AConsumer (personal,household use only)Commercial (any comm
3CONGRATULATIONS on your purchase of a new snow thrower. It has been designed, engineered and man u -fac tured to give best possible dependability an
4PARTS PACKED SEPARATELY IN CARTON(1) POWER CORD(198563)(1) DISCHARGE CHUTE(6) SHOULDERBOLT 1/4-20 x 1-3/4(192090)(1) WASHER 3/8(19131316)(1) LOCKNUT
5ASSEMBLY / PRE-OPERATIONRead these instructions and this manual in its entirety before you attempt to assemble or operate your new snow thrower. Rea
6ASSEMBLY / PRE-OPERATIONINSTALL TRACTION DRIVE CONTROL ROD(See Figs. 3 and 4)The traction drive control rod is installed on the snow thrower.1. Remo
7ASSEMBLY / PRE-OPERATIONINSTALL DISCHARGE CHUTE / CHUTE ROTATOR HEAD (See Fig. 7)NOTE: The multi-wrench provided in your parts bag may be used to ins
8OPERATIONKNOW YOUR SNOW THROWERREAD THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR SNOW THROWER. Compare the illustrations with
9MEETS A.N.S.I. SAFETY REQUIREMENTSOur snow throwers conform to the standards of the American National Standards Institute.FIG. 10OPERATIONDrive speed
Comments to this Manuals