Husqvarna ProFlex 18 User Manual download pdf (Page 20)

18 – English

Mowing pattern

• Localise and mark stones and other fixed

objects to avoid collision.

• Start with a high cutting height and reduce down

until the required mowing results are obtained.

• The mowing results are best with a high engine

speed (fast rotating blades) and low driving

speed (slow moving machine). If the grass is not

too high and thick, the driving speed can be

increased without noticeably depreciating the

mowing result.

• The best lawns are achieved if the grass is cut

often. Mowing becomes more uniform and the

grass cuttings become more evenly distributed

over the surface.

The total time consumption is not greater since

it is possible to select a higher driving speed

without inferior mowing results.

• Avoid mowing a wet lawn. The mowing results

are inferior since the wheels sink down into the

soft lawn.

• Hose down the cutting unit with water

underneath each time it is used. The cutting unit

should be raised into the service position when

cleaning.

• If you use the BioClip unit it is important to mow

the grass regularly.

MAX 15

Cutting tips

WARNING!

Clear the lawn from stones and

other objects which can be

thrown out by the blades.

WARNING!

Never drive the machine on

ground at an angle of more than

15°. Mow slopes upwards and

downwards, never across. Avoid

sudden changes in direction.

DRIVING

6007-212

6016-104

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 67 68

Comments to this Manuals

No comments

Husqvarna ProFlex 18 User Manual Page 20

Comments to this Manuals

Related products and manuals for Lawnmowers Husqvarna ProFlex 18