Husqvarna PF 21 AWD User Manual download pdf (Page 19)

English – 19

Driving

Driving the Rider

1 Release the parking brake by ﬁrst pressing down the

parking brake pedal and then releasing it.

2 Carefully press down one of the pedals until the required

speed is obtained. Pedal (1) is used to drive forwards, and

pedal (2) to drive backwards.

3 Press in the lock button on the mechanical lifting lever and

lower the cutting unit.

If the cutting unit does not lower completely, or if the

blades do not rotate, lower the cutting unit completely

using the hydraulic lifting lever. In order to ensure that the

hydraulic cylinder is in the outer position, hold the lever in

the forward position for a half to one second.

4 Select the required cutting height (1-7) with the cutting

height lever.

It is important that the air pressure in both front wheels is

equal, 60 kPa / 8.5 PSI, to produce an even cutting height.

Braking

Release the drive pedals. The machine slows and is stopped

by the drive system. Do not use the parking brake as the drive

brake.

Quicker braking is possible if you press down the drive pedal

for the opposite direction.

IMPORTANT INFORMATION

The life span of the drive belts is increased signiﬁcantly if

the engine runs at a low speed when the blades are

engaged. Therefore apply full throttle ﬁrst when the cutting

unit has been moved to the mowing position.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

No comments

Husqvarna PF 21 AWD User Manual Page 19