Husqvarna LTH140 User Manual download pdf (Page 8)

ASSEMBLY

INSTALL BATTERY (See Figs. 4 and 5)

CAUTION: Do not short battery termi-

nals. Before installing battery, remove

metal bracelets, wristwatch bands,

rings, etc.

Positive terminal must be connected

first to prevent sparking from acciden-

tal grounding.

• Lift seat to raised position.

• Open battery box door.

• Be sure battery drain tube is attached to battery box.

• Lower battery into battery box with battery terminals

toward front of tractor.

• First connect RED battery cable to positive (+) terminal

with hex bolt, flat washer, lock washer and hex nut as

shown. Tighten securely.

• Connect BLACK grounding cable to negative (-) termi-

nal with remaining hex bolt, flat washer, lock washer

and hex nut. Tighten securely.

• Close battery box door.

Open battery box door for:

• Inspection for secure connections (to tighten hard-

ware).

• Inspection for corrosion.

• Testing battery.

• Jumping (if required).

• Periodic charging.

FLAT

WASHER

LOCK WASHER

POSITIVE

(RED)

CABLE

HEX

BOLT

POSITIVE (+) TERMINAL

NEGATIVE (-) TERMINAL

FIG. 4

NEGATIVE

(BLACK)

CABLE

HEX NUT

BATTERY

BOX COVER

VENT CAPS

FIG. 5

TO ATTACH FRONT BUMPER (See Fig. 6)

NOTE: For ease of assembly, you may wish to obtain the

assistance of another person for mounting bumper to

tractor.

• Press or tap the end caps into ends of bumper tube.

• Slide reinforcement plates inside flattened ends of

bumper and align holes in plates with slots in bumper

as shown.

• With plate and bumper holes aligned, set bumper on

ground in front of tractor and align the end holes in

bumper with the rear holes in tractor chassis. On both

sides of chassis loosely install carriage bolt, washer

and locknut. Do not tighten.

• Pivot bumper upwards to align holes with forward

chassis holes and install carriage bolt, washer and

locknut to both sides of chassis.

• Tighten all four (4) locknuts securely.

REINFORCEMENT

PLATE

BUMPER

END CAP

Install Rear

Hardware First

Then Pivot

Upwards

WASHER

LOCKNUT

FIG. 6

CARRIAGE

BOLT

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 50 51

Comments to this Manuals

No comments

Husqvarna LTH140 User Manual Page 8

Comments to this Manuals

Related products and manuals for Lawnmowers Husqvarna LTH140