EEEEnnnngggglllliiiisssshhhh 325HD A65X-series 323HE3 325HE3X-series 325HE4 X-series Oper ator ′ s manual Please r ead the operator’s manual caref
10 – EnglishASSEMBLYFitting the hand guard and loop handle(325HDA65,323HE3,325HE3)1 Assemble the hand guard and loop handle by screwing them together.
English – 11ASSEMBLYFitting the impact guard(325HE4)Fit the guard using the three screws and washers. Fit the two short screws in hole A. Tighten the
12 – EnglishFUEL HANDLINGFuel safetyNever start the machine:1 If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporat
English – 13FUEL HANDLINGMixing• Always mix the petrol and oil in a clean container intended for fuel.• Always start by filling half the amount of the
14 – EnglishSTARTING AND STOPPINGCheck before starting• Inspect the working area. Remove any objects that could be thrown out.• Check the cutting atta
English – 15WORKING TECHNIQUESGeneral working instructionsPersonal protection• Always wear boots and other equipment described under the heading Perso
16 – EnglishWORKING TECHNIQUESSafety instructions after completing work• The transport guard should always be fitted to the cutting attachment when the
English – 17WORKING TECHNIQUES• Tighten the knob.(325HE3,325HE4)• Loosen the knob on the shaft (clockwise).• Press the cutting unit against the hedge
18 – EnglishMAINTENANCECarburettorYour Husqvarna product has been designed and manufactured to specifications that reduce harmful emissions. After the
English – 19MAINTENANCEFine adjustment of the idle speed TAdjust the idle speed with the idle adjustment screw T, if adjustment is necessary. First tu
2 – English KEY T O SYMBOLS Symbols W ARNING! Incorrect or careless use of a hedge trimmer can turn it into a dangerous tool that can cause seriou
20 – EnglishMAINTENANCECooling systemTo keep the working temperature as low as possible the machine is equipped with a cooling system.The cooling syst
English – 21MAINTENANCEGear housingThere is a grease nipple and a plug for filling lubricant on the gear housing. Use a grease gun to fill with grease.
22 – EnglishMAINTENANCE´®z+R;r¶6_¨´®z+R;r¶6_¨Maintenance scheduleThe following is a list of the maintenance that must be performed on the machine. Mos
English – 23TECHNICAL DATATechnical dataNote 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/
´®z+R;r¶6_¨2009-06-03´®z+R;r¶6_¨1150278-26
English – 3 CONTENTS Contents Note the f ollowing before starting: Please read the oper ator’s manual carefully. KEY TO SYMBOLS Symbols ...
4 – English INTR ODUCTION Dear Customer , Cong ratulations on your choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates
English – 5 WHA T IS WHA T? What is what?22120 1 Cutter2 Grease nipple and plug for filling lubricant.3 Bevel gear4 Blade guard (325HDA65)5 Shaft6
6 – English GENERAL SAFETY PRECA UTIONS Impor tant Personal protective equipment HEARING PR OTECTIONWear hearing protection that provides adequate
English – 7 GENERAL SAFETY PRECA UTIONS FIRST AID KIT Alw ays have a first aid kit nearby. Mac hine ′ s safety equipment This section descr ibes the
8 – EnglishGENERAL SAFETY PRECAUTIONSHand guard(325HDA65,323HE3,325HE3)The hand guard prevents hands from coming into contact with the moving blades,
English – 9GENERAL SAFETY PRECAUTIONSBladesTo ensure good cutting results it is important that the contact pressure between the blades is correct. The
Comments to this Manuals