Husqvarna 26HS75 User Manual

EEEEnnnngggglllliiiisssshhhh 326HS75 X-series 326HS99 X-series Oper ator’s manual (EPA) Please r ead the operator’s manual carefully and make sure y

10 – EnglishFUEL HANDLINGFuel safetyNever start the machine:1 If you have spilled fuel on it. Wipe off the spillage and allow remaining fuel to evapor

English – 11FUEL HANDLINGMixing• Always mix the gasoline and oil in a clean container intended for fuel.• Always start by filling half the amount of th

12 – EnglishSTARTING AND STOPPINGCheck before starting• Inspect the working area. Remove any objects that could be thrown out.• Check the cutting atta

English – 13STARTING AND STOPPINGStartingHold the body of the machine on the ground using your left hand (CAUTION! Not with your foot!). Grip the star

14 – EnglishWORKING TECHNIQUESGeneral working instructionsPersonal protection• Wear personal protective equipment. See instructions under the heading

English – 15WORKING TECHNIQUESSafety instructions after completing work• The transport guard should always be fitted to the cutting attachment when the

16 – EnglishMAINTENANCECarburetorYour Husqvarna product has been designed and manufactured to specifications that reduce harmful emissions. After the e

English – 17MAINTENANCEFine adjustment of the idle speed TAdjust the idle speed with the idle adjustment screw T, if adjustment is necessary. First tu

18 – EnglishMAINTENANCECooling systemTo keep the working temperature as low as possible the machine is equipped with a cooling system.The cooling syst

English – 19MAINTENANCEGear housingThere is a grease nipple and a plug for filling lubricant on the gear housing. Use a grease gun to fill with grease.

2 – English KEY T O SYMBOLS Symbols W ARNING! Incorrect or careless use of a hedge trimmer can turn it into a dangerous tool that can cause seriou

20 – EnglishMAINTENANCEMaintenance scheduleThe following is a list of the maintenance that must be performed on the machine. Most of the items are des

English – 21TECHNICAL DATATechnical dataNote 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure lev

22 – EnglishFEDERAL AND CALIFORNIA EMISSIONS CONTROL WARRANTY STATEMENT´®z+RDy¶5G¨´®z+RDy¶5G¨YOUR WARRANTY RIGHTS AND OBLIGATIONSThe EPA (U.S. Environ

English – 23FEDERAL AND CALIFORNIA EMISSIONS CONTROL WARRANTY STATEMENTADD -ON OR MODIFIED PARTSAdd-on or modified parts that are not exempted by CARB

´®z+RDy¶5G¨2006-12-13´®z+RDy¶5G¨1150368-95

English – 3 CONTENTS Contents Note the f ollowing before starting: Please read the oper ator’s manual carefully.This engine label certifies that the

4 – English INTR ODUCTION Dear customer! Cong ratulations on your choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates b

English – 5 WHA T IS WHA T? What is what? 1 Operator’s manual2 Grease nipple3 Gear housing4 Blades5 Hand guard6 Front handle7 Cylinder cover8 Star

6 – English GENERAL SAFETY PRECA UTIONS Impor tant Personal protective equipment HEARING PR OTECTIONWear hearing protection that provides adequate

English – 7 GENERAL SAFETY PRECA UTIONS FIRST AID KIT Alw ays have a first aid kit nearby. Mac hine ′′′′ s safety equipment This section descr ibes

8 – English GENERAL SAFETY PRECA UTIONS Hand guar d The hand guard pre vents hands from coming into contact with the moving blades, for example, if

English – 9GENERAL SAFETY PRECAUTIONSBladesTo ensure good cutting results it is important that the contact pressure between the blades is correct. The