Husqvarna 324LDX User Manual

EEEEnnnngggglllliiiisssshhhh 324L X-series 324LD X-series Oper ator ′ s manual Please r ead the operator’s manual carefully and make sure you unders

10 – EnglishASSEMBLYFitting the loop handle• Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the sh

English – 11ASSEMBLYFitting a trimmer guard and Superauto II 1” trimmer head• Fit the correct trimmer guard (A) for use with the trimmer head. Hook th

12 – EnglishFUEL HANDLINGFuel handlingNever start the machine:1 If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evapor

English – 13FUEL HANDLINGFuellingClean around the fuel cap. Clean the fuel and oil tank regularly. The fuel filter should be changed at least once a ye

14 – EnglishSTARTING AND STOPPINGCheck before starting• Check that the support flange is not cracked due to fatigue or due to being tightened too much.

English – 15STARTING AND STOPPINGWarm engineIgnition: Set the stop switch to the start position.Choke: Put the choke in working position.Primer bulb:

16 – EnglishWORKING TECHNIQUESGeneral working instructionsBasic safety rules1 Look around you:• To ensure that people, animals or other things cannot

English – 17WORKING TECHNIQUESGrass trimming with a trimmer headTrimming• Hold the trimmer head just above the ground at an angle. It is the end of th

18 – EnglishMAINTENANCECarburettorFunction• The carburettor governs the engine’s speed via the throttle control. Air and fuel are mixed in the carbure

English – 19MAINTENANCESpark plugThe spark plug condition is influenced by:• Incorrect carburettor adjustment.• A dirty air filter.These factors cause d

2 – English KEY T O SYMBOLS Symbols W ARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in s

20 – EnglishMAINTENANCEMaintenance scheduleThe following is a list of the maintenance that must be performed on the machine. Most of the items are des

English – 21TECHNICAL DATATechnical dataNote 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/

22 – EnglishTECHNICAL DATAThe following attachments are recommended for the specified models.The following attachments have been developed mainly for t

1Super Auto IISuper Auto II 123456789104,0 m 13'2,4 mm.095"~2,0 m6,5'6"6""15 cm15 cm

"Clic"12356710118,5 m28'484,2 m14'2,4-2,7 mm.095-.106"10 cm 4"6"15 cmS35

´®z+R:,¶6R¨´®z+R:,¶6R¨12432,4-2,7 mm.095-.106"4,25 m14'4,25 m14'B6"15 cmA6"15 cmS355

T35, T35x"Clic"12356798,5 m28'484,3 m14'2,4-2,7 mm.095-.106"10 cm 4"6"15 cm

´®z+R:,¶6R¨2007-01-29´®z+R:,¶6R¨1150261-26

English – 3 CONTENTS Contents Note the f ollowing before starting: Please read the oper ator’s manual carefully. KEY TO SYMBOLS Symbols ...

4 – English INTR ODUCTION Dear Customer , Cong ratulations on your choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates

English – 5 WHA T IS WHA T? What is what?LDX 1 Trimmer head2 Bevel gear3 Grease filler cap, bevel gear4 Cutting attachment guard5 Shaft6 Loop handl

6 – English GENERAL SAFETY PRECA UTIONS Impor tantPersonal protective equipment HEARING PR OTECTIONWear hearing protection that provides adequate n

English – 7 GENERAL SAFETY PRECA UTIONS Mac hine ′′′′ s safety equipment This section descr ibes the machine ′ s safety equipment, its purpose, an

8 – English GENERAL SAFETY PRECAUTIONSCutting attachment guardThis guard is intended to prevent loose objects from being thrown towards the operato

English – 9GENERAL SAFETY PRECAUTIONSIf the muffler on your machine is fitted with a spark arrestor mesh this must be cleaned regularly. A blocked mesh