Husqvarna K650 User Manual download pdf (Page 2)

2 – English

KEY TO SYMBOLS

Symbols on the machine:

WARNING! The machine can be a

dangerous tool if used incorrectly or

carelessly, which can cause serious or

fatal injury to the operator or others.

Please read the operator’s manual

carefully and make sure you understand

the instructions before using the machine.

Always wear:

• Protective helmet

• Hearing protection

• Protective goggles or a visor

• Breathing mask

WARNING! Dust forms when cutting, this

can cause injuries if inhaled. Use an

approved breathing mask. Avoid inhaling

petrol fumes and exhaust fumes. Always

provide for good ventilation.

WARNING! Sparks from the cutting blade

can cause ﬁre in combustible materials

such as: petrol (gas), wood, dry grass etc.

Choke symbol

Stop symbol

Water cooling must always be used.

Always cut in the correct direction. See

safety instructions!

Other symbols/decals on the machine

refer to special certiﬁcation requirements for certain

markets.

You will ﬁnd the following labels on your power cutter:

The Emissions Compliance Period referred to on the

Emission Compliance label indicates the number of operating

hours for which the engine has been shown to meet Federal

emissions requirements. Category C = 50 hours, B = 125

hours, and A = 300 hours.

Symbols in the operator’s manual:

Switch off the engine by moving the stop

switch to the STOP position before carrying

out any checks or maintenance.

Run position.

Choke lever in ”closed position”.

Choke lever in ”open position”.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be worn.

The engine exhaust from this product

contains chemical known to the State

of California to cause cancer, birth

defects or other reproductive harm.

1 2 3 4 5 6 7 ... 23 24

Comments to this Manuals

No comments

Husqvarna K650 User Manual Page 2

Comments to this Manuals