Husqvarna 380BFS User Manual download pdf (Page 14)

English

■

FLEXIBLE HOSE AND SWIVEL JOINT

1. Connect the blower and swivel joint with ﬂexible hose. Clamp both ends

of the ﬂexible hose securely with the hardware supplied with the unit.

(1) Flexible hose (2) Swivel joint

(3) Clamp (large) (4) Clamp (small)

NOTE

A light lubricant may be used to ease assembly of ﬂexible hose to

blower elbow.

■

CONTROL HANDLE [130BT/350BT/370BTS/380BTS]

1. Set up the handle holder to the swivel joint and tighten the knob on the

holder.

When setting up the handle holder, please make sure to match the handle

holder to the convex on the swivel joint as shown in F2.

2. Adjust the position and angle to achieve a comfortable working

position, and tighten the control handle.

(1) Cabling

(2) Flexible hose

■

CABLING [130BT/350BT/370BTS/380BTS]

[130BT]

- Fasten the cabling at central position of the hose by the band

attached to the cabling.

First, wrap the ﬂexible hose with the band ﬁxed to the cabling from

the lower side.

Then, pass the band through a hole of the band as shown in ﬁgure.

Please note that there is a possibility of damaging the hose if the

band is fastened too tightly.

[350BT] [370BTS] [380BTS]

- Use the clamp to fasten the cabling to the ﬂexible hose.

(1) Clamp

■

RIGHT HANDLE [350BF/370BFS/380BFS]

- Insert the handle holder to the swivel and tighten the knob on the

holder.

When setting up the holder, please make sure to match the holder to the

convex on the swivel joint as shown in F5.

■

HANDLEBAR [OPTION] [130BT/350BT/370BTS/

380BTS]

1. Insert the holder, then assemble the handlebar (OPTION) and tighten it

securely.

(2)

(1)

(4)

(3)

(1)

(2)

[130BT]

(1)

[350BT] [370BTS] [380BTS]

Assembly

H1153190-95US.fm Page 14 Tuesday, December 15, 2009 9:05 AM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21

Comments to this Manuals

No comments

Husqvarna 380BFS User Manual Page 14

Comments to this Manuals

Related products and manuals for Fans Husqvarna 380BFS