Husqvarna 36 User Manual

©HusqvarnaFOREST & GARDEN36/41Operator’s manual101-86 95 62REV. 2-04/12/95

Maintenance and functionAir filterThe air filter must be regularly cleaned from dust and dirt in order to avoid:• Carburettor malfunctions• Starting

starter deviceA WARNING!• When the recoil spring is assembled in the starter housing, it is in tensioned position and can when treated carelessly, pop

Chain maintenanceChain maintenance - safetyFor the personal safety, it is of great importance, that the bar and chain combinations of so cal

Chain maintenanceBSharpeningNever cut with a dull saw chain. A chain which does not cut unless you press it hard against the wood is damaged, dull or

14

MaintenanceBelow you will find some generai maintenance instructions, if you have more questions, contact your servicing dealer. “1 Use only genuine H

CarburettorFunctioning, Basic setting, Final setting/¡\ WARNING! Do not start the saw without the bar, chain and clutch ' cover (chain brake) ass

Equipment neededClothingThe proper clothing and equipment (as shown) protect you from many potential hazards such as lacerations, throw

General working instructionGeneralAvoid cutting in adverse weather conditions, such as dense fog, heavy rain, high winds, etc. Adverse weather is ofte

General working instructionBasic rules for felling treesNormally the felling consists of two main cutting operations - notching and making the felling

General working instructionLimbingLimbing is removing the branches from a felled tree.A WARNING! A majority of kickback accidents occur during ^ limbi

General working instructionCommon senseWe have already pointed out that a chain saw is a dangerous tool, if used carelessly, or if improperly maintain

You will find one or more of the following warning labels on the saw In black printing on yellow background.USACANâs WARNING Abetween any objectAvoid

Safety Precautions(ANSI B 175.1 -1985 Appendix D) Safety Precautions for Chain Saw UsersD 1. Kickback Safety Precautions/j\ WARNING!: KICKBACK may occ

What is what on the saw1. Cylinder cover.2. Front handle.3. Front hand guard.4. Starter.5. Chain oil tank.6. Starter handle.7. Adjustment screws, carb

Mounting guide bar and chain^ WARNING! Always wear gloves, when working with the chain, ‘ in order to protect your hands from injury.Check that the

Fuelmix and chain oilMin 3 m (10 ft)/¡\ WARNING! The chain saw is equipped with a two-stroke engine. Always run the saw with fuel, which is mixed with

start and stopstart and stop^WARNING!’ • Never start the saw engine without the bar, chain and clutch cover (chain brake) assembled - or else the clut

Chain brakeThe saw is equipped with a chain brake. The brake is designed to stop the chain immediately in the event of a kick-back. The brake activate