Husqvarna HA 110 User Manual download pdf (Page 9)

English – 9

ASSEMBLY

Fitting the hand guard and loop

handle (HA 110)

1 Loosen the clutch sleeve’s two mounting bolts and

dismantle the clutch sleeve.

2 Assemble the hand guard and loop handle by screwing

them together. Take care to align the holes in both parts.

3 Slide the loop handle and hand guard onto the shaft.

4 Slide the spacer into the slot in the loop handle.

5 Fit the nut and screw. Do not overtighten.

6 Now make a ﬁnal adjustment to give yourself a

comfortable working position. Tighten the screw.

CAUTION! The loop handle and hand guard must not be

ﬁtted behind the arrow marked on the shaft.

7 Fit the clutch sleeve and tighten the two mounting bolts.

Fitting the cutting head

It is important that the hedge trimmer is laid on a ﬂat surface

when you ﬁt the cutting head. Otherwise the cutting head may

not be ﬁtted straight.

1 Fit the cutting head to the shaft. CAUTION! Make sure the

drive shaft inside the shaft engages with the recess in the

cutting head.

2 Tighten the lower screw ﬁrst, then the upper screw.

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

Husqvarna HA 110 User Manual Page 9