EEEEnnnngggglllliiiisssshhhh K2500 Oper ator ′ s manual Please r ead the operator’s manual carefully and make sure you understand the instructions b
10 – EnglishSAFETY INSTRUCTIONSCheck that the blade is approved for the same or higher speed according to the aproval plate of the engine. Never use
English – 11ASSEMBLYAssemblyFitting the cutting bladeHusqvarna’s blades are approved for hand-held power cutters. Blades are manufactured with three d
12 – EnglishSTARTING AND STOPPINGStarting and stoppingStarting• Grip the front handle with the left hand.• Grip the rear handle with the right hand. W
English – 13MAINTENANCEMaintenanceTensioning the drive beltThe drive belt is fully enclosed and well protected from dust and dirt.When the drive belt
14 – EnglishMAINTENANCE´®z+R=@¶6r¨´®z+R=@¶6r¨Daily maintenanceCarry out the following checks daily before using the machine.1 Check that nuts and scre
English – 15TECHNICAL DATATechnical dataNote 1: Handle vibrations are measured according to ISO 8662-4 Cutting equipment EC-declaration of conformity(
´®z+R=@¶6r¨2006-12-20´®z+R=@¶6r¨1150293-26
2 – English KEY T O SYMBOLS K ey to symbols W ARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serio
English – 3 CONTENTS Contents KEY TO SYMBOLS K ey to symbols ... 2 CONTENTS Contents ..
4 – English WHA T IS WHA T? What is what on the po wer cutter?1617 1 Cutting blade2 Guard for the blade3 Catch for the guard4 Front handle5 Water
English – 5 SAFETY INSTR UCTIONS Steps bef ore using a new power cutter. • This machine is a hydraulically operated power cutter intended for free-
6 – English SAFETY INSTR UCTIONS Switc h lock The s witch lock is designed to prevent accidental operation of the switch. When the lock (A) is pres
English – 7 SAFETY INSTR UCTIONS • Wear personal protective equipment. See instructions under the heading Personal protective equipment.• Never use
8 – EnglishSAFETY INSTRUCTIONS• Support the work piece in such a way that it is possible to predict what will happen, and so that the cut remains open
English – 9SAFETY INSTRUCTIONS• Stand at a comfortable distance from the work piece.• Take care when inserting the blade in an existing cut.• Never cu
Comments to this Manuals