Husqvarna T425 User Manual download pdf (Page 19)

STARTING AND STOPPING

English – 19

Starting and stopping

Cold engine

Starting: The chain brake must be engaged when the

chain saw is started. Activate the brake by moving the

front hand guard forwards.

Set the switch to ”I” position.

Primer bulb: Press the air purge repeatedly until fuel

begins to ﬁll the bulb. The bulb need not be completely

ﬁlled.

Ignition; choke: Pull the choke knob to the second-stage

position. The choke will close and the throttle lever will

then be set in the starting position.

Warm engine

Use the same starting procedure as for a cold engine.

Starting

Grip the front handle with your left hand and push the

chain saw to the ground. Grip the starter handle with your

right hand and pull out the starter cord slowly until you feel

a resistance (as the starter pawls engage) and then pull

ﬁrmly and rapidly. Never twist the starter cord around

your hand.

CAUTION! Do not pull the starter cord all the way out and

do not let go of the starter handle when the cord is fully

extended. This can damage the machine.

Push in the choke control as soon as the engine ﬁres

which can be heard through a "puff" sound. Keep on

pulling the cord powerfully until the engine starts. When

WARNING! Note the following before

starting:

The chain brake must be engaged when

the chain saw is started to reduce the

chance of contact with the moving chain

during starting.

Never start a chain saw unless the bar,

chain and all covers are ﬁtted correctly.

Otherwise the clutch can come loose and

cause personal injuries.

Place the machine on ﬁrm ground. Make

sure you have a secure footing and that

the chain cannot touch anything.

If you need to start the chain saw in the

tree, see instructions under the heading

Starting the saw in the tree, under the

section Working techniques.

Keep people and animals well away from

the working area.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 339 340

Comments to this Manuals

No comments

Husqvarna T425 User Manual Page 19

Comments to this Manuals

Related products and manuals for Petrol tool Husqvarna T425