Husqvarna ProFlex 21 User Manual download pdf (Page 85)

English-83

SERVICE JOURNAL

Service journal

Action

1. Delivery Service

2. Fill the battery with battery acid and charge for four hours.

3. Fit the steering wheel, seat and, where applicable, other

components.

4. Attach the cutting unit.

5. Adjust the cutting unit:

Adjust the lifting springs (the “weight” of the cutting unit should

be 12-15 kg, if a brush is to be used, set to maximum spring

force).

Adjust the cutting unit so that its rear edge is about 2-4 mm

higher than its front edge.

Adjust the cutting unit’s cutting height setting so that the

cutting height limit is 5 mm above the unit frame at the lowest

cutting height.

Check that the right amount of oil is in the engine and

transmission.

6. Check and adjust the air pressure in the tyres (60 kPa, 0.6 bar).

7. Connect the battery.

8. Fill the fuel tank and start the engine.

9. Check that the machine does not move in neutral.

10. Check:

Driving forwards.

Reversing.

Engaging the blades.

Safety switch in the seat.

Safety switch for the lifting lever.

The safety switch for the hydrostat pedals.

11. Check the engine speed: 3,000 ±75 rpm.

12. Bleed the hydraulic system (PF 21).

13. Inform the customer about:

14. The need and advantages of following the service schedule.

15. The need and advantages of leaving the machine for service

every 300 hours.

16. The effects of service and maintaining a service journal on the

machine’s resale value.

17. Application areas for Mulching.

18. Fill in the sales papers, etc.

After the First 8 Hours

1. Change engine oil.

Date, mileage reading, stamp,

signature

Delivery service has been

carried out.

No remaining remarks.

Certiﬁed:

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 95 96

Comments to this Manuals

No comments

Husqvarna ProFlex 21 User Manual Page 85

Comments to this Manuals

Related products and manuals for Lawnmowers Husqvarna ProFlex 21