Operators manualSC18/968981201SC18/968999352Models:Please read these instructions carefully and makesure you understand them before using the machine.
10PROBLEM ANSWER/COMMENTBlade not disengaging New Unit or New Belt:1. Run the machine with the blade engaged until the beltstretches.Used Unit or Old
11PROBLEM ANSWER/COMMENTBelt glazed or slipping 10. Be sure the Belt Idler Assembly is adjusted correctly.See Technical Bulletin “Inspection Procedure
12SOUND AND VIBRATION STATMENT
13This page left black intentionally
Technical assistance:For technical assistance please contact your Local Dealer.
2CONTENTSSPECIFICATIONSU.S. Metric Engine - Honda: 5.5 hp 3.8 kw Net Weight: 328 lbs 149 kg Shipping Weight: 360 Ibs 164 kg Width: 24 in 61 cm Height:
3FEATURES AND CONTROLSOil used in the engine (gray cap) 1. Refer to your engine manual for oil type, viscosity, weight and capacity.Oil used in the
4OPERATING INSTRUCTIONSGENERAL INFORMATIONThis manual will assist you in the safe operation and proper maintenance of your Husqvarna equip-ment. Read
5OPERATING INSTRUCTIONS• Do not attempt sharp turns while cutting.• Should I water before cutting?It is usually not necessary to water before cutting.
6SAFTEY AND MAINTENANCECAUTIONAny modifications or additions to this equipment without written authorization from the manufacturerwill void all manufa
7SERVICE AND MAINTENANCEBLADE WEARSod cutter blades may wear quickly depending on soil condition. Replace blade when worn to 1 1/2”(3.8cm) or less. Ma
8TROUBLESHOOTINGPROBLEM ANSWER/COMMENTTransmission shaft broke 1. Ensure debris is not caught in the Transmission Chain orwrapped around the transmiss
9PROBLEM ANSWER/COMMENTChain (Drive) is coming off, The Transmission Output Sprocket is a fixed (non adjustable)drive sprocket wearing sprocket which
Comments to this Manuals